Drawing

A range of electric self-braking wormgear winches developed in accordance to the European standards for lifting winches specially FEM 1.001 T3-L3-M4 and DIN 15020-1AM with a long life service. The self-braking wormgear is combined with an automatic fail-safe motor brake for precise load control. A grooved drum is fi tted as standard according to the CE standard on types EN 500 to EN 1700. A grooved drum ensures long service life for the cable.

Standard features

• Self-braking wormgear transmission
• IP 54 aluminium braked motor 400 VAC / 3 phases / 50 Hz.
• Grooved steel drum (not grooved on EN 200, EN 450) with cable fixing point at flange
• Single drum support (EN 200, EN 450)
• Two drum supports (all other models)
• Double layer 2-component conservation according ISO 12944 category C2-Low, colour RAL 5010
• FEM / ISO class T3-L3-M4

Mechanical options

• IP 56 TENV cast iron motor for marine applications
• 220 V AC single-phase motors (up to EN 500)
• 24 V DC motors
• Explosion-proof motors
• Protective steel motor cover
• Drum pressure roller
• Alternative speeds
• Alternative drum dimensions / split drums / additional rope anchors / etc.
• Drum guards
• Emergency cranking
• Marine / offshore coating systems

Control options

• Direct pendant remote control IP 65 with emergency stop (up to 1.5 kW 220 VAC / 1 phase or 2.2 kW 400 VAC / 3 phase)
• IP 55 Control box with push-buttons and emergency stop built acc. to NEN60204-32
• IP 66 Control box with low voltage IP 65 remote control built acc. to NEN60204-32
• Load limiter (required by CE for applications exceeding 1000 kg WLL)
• Frequency inverter for variable speed control
• Wireless radio remote control systems
• Limit switches
• Slack wire switches